3 Ways to Find a Stud - Teach me! How to?

3 Ways to Find a Stud

How to use stud finder

You need a 24/7 wall stud when hanging pictures, frames, television, Ac, shelves or a wall mounting furniture. Of course, nailing alone in the drywall may cause too much weight over the wall and can even crumble down. Luckily, you have got stud finders to practically help you with hanging things around the wall.

How does a stud finder work?


Previously, it was all magnetic stud finders. Now it electronic stud finders have changed those days. Electronic ones show the exact view and the stud on the wall. The electronic stud finders help you to trace out the correct spot of the stud and you can easily drill out the area.


The plate in the stud finder senses the insulating value and it works as per the density generated by the difference. The circuit finds the change on the wall and reports on the machine.


Now, let us know how to use stud finder.

Step one


You ought to decide and prepare yourself with certain materials that you would need to hang in your stuff over the walls and ceilings. The best stud finder will help you to know where you exactly want to hang the material, and how long will it require mounting.

Step Two


Stud finder batteries should be healthy and working. Make sure that your stud finder batteries are in good condition. It is better to replace the old batteries with the fresh ones. Weak batteries can end up resulting in distorted readings. The flat surface of a stud finder should be clean and out of dust.

Step Three


Studs are generally 16 to 24 inches separate, so better look for a stud finder which is just two-foot span. Once you have found an ideal stud finder, you have to hold it against the wall where you want to drill it. Make sure you have held it at least 1 foot far against that spot.

Step Four


Once you place the stud finder, it will start alerting you for the right place, verify and double check the spot. Trace the spot and mark it with a pencil. It would be better if you use a center-finding finder, it will alert you for the exact edges.

Sometimes, your stud finder may signal some false alerts, when there are piping and flashings inside the wall. So, you need to be careful with that. You also need to plan which item you have to mount on your wall.

Other techniques to guide you well-


Follow these instructions, if you want to know how to use stud finder on ceilings.


  • How to use stud finder on ceilings



You gaze on your ceiling and you find that your newly purchased light fixture must be hanged from the ceiling joist to have a safe and a less weight overhead. You can easily find these joists using a stud finder on your ceilings. Stud finder works best on flat ceilings. Yet, if it’s a popcorn ceiling then it could be difficult to trace a stud. Holding a cardboard for near about 2 to 3 foot against the wall and activate the stud finder; start moving it. It will start finding out the exact spot.

Try it yourself


Stud finder generally detects the studs in the wall. Whether it is a plastic wall or a drywall it locates the exact location of the stud. Fortunately, you can easily hang your favorite items on the wall. Follow the above mentioned DIY techniques and know how to use a stud finder.


No Responses

Write a response